+高级检索 English
无粘结预应力双向板变形计算方法研究
作者:
作者单位:

(大连理工大学土木建筑学院 大连 116024)

作者简介:

宋永发

通讯作者:

中图分类号:

TU757;TU196.1

基金项目:


Research on deformation calculation method of unbonded prestressed two-way plates
Author:
Affiliation:

(School of Civil Engineering and Architecture, Dalian University of Technology, Dalian 116024)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过6块无粘结预应力双向板试验,研究了影响双向板变形的主要因素:结构形式、预应力筋配筋率。将边梁对简支板跨中最大挠度的影响转化为荷载与支座条件系数来考虑;对两个方向的预应力筋和非预应力筋对简支板跨中最大挠度的影响,用换算配筋率(ApQ)参数来反映,建立了无粘结预应力简支板短期刚度和变形计算公式。计算结果与试验结果吻合较好。

    Abstract:

    Through the test of 6 unbonded prestressed two-way plates, the main factors affecting the deformation of two-way plates are studied, such as the structural form and the ratio of prestressed reinforcement. The influence of the side beam on the maximum deflection in the span of simply supported plate is converted into load and support condition coefficients. The effect of prestressed and non-prestressed tendons in two directions on the maximum deflection in the span of simply supported plates is reflected by the reduced ratio of reinforcement (ApQ) parameter, and the formula for calculating the short-term stiffness and deformation of unbonded prestressed simply supported plates is established. The calculated results agree well with the experimental results.

    参考文献
    相似文献
    引证文献
引用本文

Yongfa Song, Qingxiang Wang, Yupu Song, Xiao Bing, Baohe Zhang Research on deformation calculation method of unbonded prestressed two-way plates. Prestress Technology 2005,9(06):23-25. 10.59238/j. pt.2005.06.005

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-08-09
  • 出版日期: